CLUG Bicycle Storage System

I have two CLUGs... a "MTB 44-57mm" for my bike with 2.1"W tires and a "MTB XL 58-69mm" for my 2.6"W tires. CLUGs make storage a breeze! Sooo much floor space saved!! And honestly it's super attractive storage - I enjoy seeing the bikes there. Snapping the front tires in place and popping them out is super easy. I did listen to the reviews that said not to place CLUGs in a high traffic area, because the bike can get knocked askew. This is true - but I wouldn't want it to lock onto my bike so hard that damage is caused if I then crash into the bike while walking or carrying something! The CLUGs work perfect in the corner of my room. They also mount very securely to the wall. Would've been a breeze to mount with two people... someone to hold the guide in place. Unfortunately I didn't have help, but it was still manageable. The box comes with an AWESOME guide built right in to help you place your screws into the right spot. I can't imagine not having CLUGs now that I've experienced them! It's such simple storage!! Gives bikes their own space without bumping against anything or tipping and getting damaged. Also, the upright storage position is good for suspension in the forks... GearHooks says it well here: "If the bike is stored vertically on the wall, the forks are tilted backwards. This means that the oil in the forks runs backwards and pools against the foam seals. This keeps the seals properly lubricated and stops them drying out." All in all these CLUGs are one of my favorite purchases ever!

So it's been almost a year since I bought it. I was so scared to put it up in my new home and really frustrasted of all the hanging curtains, pictures, and shelves I had already done. I put it on my wall last weekend and it was extremely easy to do. Please make sure to use a stud finder and use the screw anchors that come with it!! You must make the holes bigger for both the screws and anchors. I was waiting to hear a crash made by my bike, but it hasn't fallen. I have no garage so I have to store in my laundry room. Really good product and I would recommend it.

I am using this in a very specific way. I have placed it on the floor of my Honda Element so when I store my road bike inside the car (rear wheel first) the front wheel is snapped onto the CLUG to hold the bike in place, which it does. The wheel snaps into place and holds in place. I should mention that the real wheel of the bike gets lodged between the two front seats of the Element so that also holds the bike in place from the rear. Like I said, very specific use and works very well for me. Four stars because although its made out of very sturdy plastic I can't say with all honesty how well this would hold the bike attached to a wall etc.

Easy to install, you do have to get the proper size for the bicycle tire width. If there is too much gap in the tire and mount clip the bicycle can wobble a bit, the city bike and med size clip mount was perfect fit, easy to clip front tire and minimum gap and no wobbling while mounted, the fatter tire bike, white and green used the large and had a tad more gap and slightly more wobbling but it still worked the rear tires must touch the wall otherwise it will wobble since the front tires are the steering part of the bicycle can can turn and the rear tire could roll away from the wall... my thoughts,... I may put a small block of wood against the rear tire...

i used this almost every day to ride my bike to class and its a supper cool idea and worked great for a bit, but just due to it being plastic and how often i used it it eventually stopped holding my bike up and just had to go with a $4 hook from the hardware store.

UPDATED REVIEW: In less than a year I've broken two of these. I replaced the first one after I broke it. I assumed it was entirely my fault. Today I was carefully taking my tire out of the CLUG when it just shattered. This product is worthless. I don't even ride my bike that much so it's not like the CLUG got overused. What an absolute waste of money. OLD REVIEW BELOW (was 5 Star): I was concerned about installing it but it installed so easily. I just followed the instructions. You will need a drill, the proper sized drill bit, a hammer (for tapping in the anchor), and screwdriver. I have 32mm tires and that is the largest tire allowed for the smallest CLUG. I was concerned that it would be hard to get the bike in and out of the CLUG but it's not bad. I do have to kind of slam the wheel into the CLUG but not a very hard slam; I just need a bit of velocity to get the tire into the CLUG. It holds very firm.

Probably not the intended application but works just fine. I've had it up for a couple months now, no issues. I didn't really like the price but, given that its the only option I could find, I suppose it's worth it. There was enough room under the clip to mount the charger (Velcro tape) which makes for a nice clean storage and charging station. The mount doesn't seem like much but its proven itself to be quite durable: I use the scooter several times a week so it gets plenty of use. Mounting was easy and straightforward. The wheel fits snug but not too tight. Very happy, just wish it was 10 bucks less...

Tolles Design, tolles Produkt, einfache Montage! Ich würde es jedem empfehlen, der eine simple und unscheinbare Halterung sucht! Klares Must!

El producto cumple con su función perfectamente. La rueda de mi bici es de 25 y se adapta perfectamente. Echo en falta que venga alguna pequeña pieza para que la rueda trasera no toque la pared y no la manche. Yo he tenido que poner un cartón que no es muy estético.

Ich gebe es zu am Anfang war ich skeptisch! Aber, es funktioniert tatsächlich! Kann nur empfehlen!

Molto pratico e funzionale

Ottimo supporto per la mia road bike. Se si monta come si deve la bici non muove per niente! NB: La ruota posteriore deve essere ben attacca al pavimento.