Monroe Magnum SC2928 Steering Damper for Jeep Wrangler

Stock replacement for my Jeep TJ after 21 years alongside a new lift kit. There's little need for a fancy dampener, this one does the trick even with 33's and a 4 inch long arm lift. Installed on the new Curry-Link drive linkage without issue, comes with all required hardware to replace the old stuff and torque specs too. Overall, A+

Nice part. Easy install. If you have a Jeep TJ, this is the one you want. I've used many of these over the years / 200K miles. Works great. I change it out about every 20K miles. Tip: Leave the mounting stud (included in this kit) in the drag-link to save yourself the headache of pressing it out. This also removes the need to mess with the crown bolt & cotter pin on the ground side of the mounting stud. Just unbolt your existing damper from the engine facing (top) side of the drag-link, push off, reinstall new, and done! On the wheel side, once you remove the bolt and the existing damper, re-orientate the bolt so that the loose nut is on the front-bumper side. This also makes things easier for install and future replacement. Also, purchase the rubber boot and then re-use it until it falls apart and you need a new one. Make sure to put the rubber boot on prior to installing the damper!

The 27 year old factory steering dampener on my Jeep YJ wasn't really doing its job anymore, so I got this to replace it. It is much stiffer than the old worn out one! Driving feels much nicer now, and I don't have to fight with the steering wheel through every pothole on a bad road. The hard part was getting the old tapered bolt out of the tie rod. But once that was removed, installation of this new steering damper was straightforward and I had the jeep back together in 15-20 minutes. I used the included hardware, which was great of them to provide. So far so good! As I mentioned, steering is much better now, and compared to the old one, this felt much beefier than the original. Plus, not that it's necessarily an indicator of quality, but I like the fact this one has "Made in USA" stamped on the housing as well as the box it came in. Also nice that it looks OEM unlike a lot of those crazy aftermarket jeep parts out there.

It does not come with a dust boot. I bought this assuming it would come with a dust boot and was let down. The product pictures do not show a dust boot but the product box I recieved does... now I have to source my own dust boot. Seems decent enough.

No more death wobble, easy install, great price. Looks good and it works. Rides like new again

Fit perfectly for my stock suspension of my 01' Jeep XJ Cherokee. Keeps steering as stable as the original damper did. Happy with purchase!

While installing to 35 ft lbs, the thread stripped on the included hardware, and I had to cut it off.! I re-used original bolt hardware. Other than that, good for the price. I would not use the included bolt hardware! Good fit on 1997 wrangler and fixed my death wobble.

Great replacement for stock OEM steering damper. Hardest part is removing the old one. Used a pitman puller to remove the old one after spraying it with PB Blaster and letting it sit for a while. Don't beat on this with a hammer go to a local auto store and rent a pitman puller if you don't have one. Once the old one was out took about 10 mins to install the new one. I torqued the bolts to 35 ft pounds as the directions said normal specs are 55 ft pounds. Frame bolt torqued to 55 ft pounds.

Fit great, easy install. Great value for OE style part.

Quedo justo y se le quitó el Bamboleo a mi Grand cherokee 94.

Was soll ich dazu sagen... siehe angehängtes Bild... der Dämpfer ist so grottig lackiert, dass einige Stellen einfach "vergessen" wurden... dort ist KEIN Lack, aber schon jede Menge Rost... für einen neuen Artikel unzumutbar, Qualitätskontrolle gleich null... der Aufdruck "made in USA" macht das ganze leider auch nicht besser, selbst Chinateile wären besser beschichtet...... puuh!

Replaced old steering damper with this one. Perfect fit.

This item worked perfectly